Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSAAB20109-5REPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTCOMMUNICATION DEVICESBUS AND DIAGNOSTICS COMMUNICATIONTECHNICAL DATAELECTRONIC BRAKE CONTROL MODULE SCAN TOOL INFORMATIONELECTRONIC BRAKE CONTROL MODULE SCAN TOOL OUTPUT CONTROLS
2010 Saab 9-5
Electronic Brake Control Module Scan Tool Output Controls
2010 Saab 9-5SECTION Electronic Brake Control Module Scan Tool Output Controls
| Output Control | Description |
|---|---|
| ABS Left Front Solenoid Valves | Commands the solenoid valves ON or OFF. |
| ABS Left Rear Solenoid Valves | Commands the solenoid valves ON or OFF. |
| ABS Pump Motor | Commands the ABS pump motor Increase or Decrease. |
| ABS Right Front Solenoid Valves | Commands the solenoid valves ON or OFF. |
| ABS Right Rear Solenoid Valves | Commands the solenoid valves ON or OFF. |
| Traction Control Left Front Solenoid Valves | Commands the solenoid valves ON or OFF. |
| Traction Control Left Rear Solenoid Valves | Commands the solenoid valves ON or OFF. |
| Traction Control Right Front Solenoid Valves | Commands the solenoid valves ON or OFF. |
| Traction Control Right Rear Solenoid Valves | Commands the solenoid valves ON or OFF. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.