SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSAAB20099-7X V8-5.3LREPAIR AND DIAGNOSISRELAYS AND MODULESRELAYS AND MODULES - HVACCONTROL MODULE HVACSERVICE AND REPAIRHVAC CONTROL MODULE REPLACEMENT
2009 Saab 9-7X V8-5.3L

HVAC Control Module Replacement

2009 Saab 9-7X V8-5.3LSECTION HVAC Control Module Replacement



HVAC Control Module Replacement

Removal Procedure




1. Remove the instrument panel (I/P) accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement (Instrument Panel Accessory Trim Plate Replacement).
2. Remove the HVAC control module screws.
3. Remove the HVAC control module from the I/P.
4. Disconnect the electrical connectors from the HVAC control module.

Installation Procedure




1. Connect the electrical connectors to the HVAC control module.
2. Install the HVAC control module into the I/P.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the HVAC control module screws and tighten to 1.9 Nm (17 in. lbs.).
4. Install the I/P accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement (Instrument Panel Accessory Trim Plate Replacement).

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.