2005 Saab 9-7X LinearFACTORY OEM SERVICE PROCEDURE

Engine Block - Bottom View

Fig 1: Engine Block Thread Repair - Bottom View
GM698369Courtesy of GENERAL MOTORS CORP.
Engine Block - Bottom View

Service Hole Location Thread Size Drill Counterbore Tool Stop Collar Tap Driver Insert Drill Depth (Max) Tap Depth (Min)
- mm (in) mm (in)
1 8 x 1.25 206 207 n/a 208 209 210 30 1.182 25 0.985
2 10 x 1.5 417 n/a n/a 418 419 420 53 2.088 45 1.773
3 8 x 1.25 206 207 n/a 208 209 210 30 1.182 25 0.985
4 10 x 1.5 417 n/a n/a 418 419 420 53 2.088 45 1.773
5 8 x 1.25 206 207 n/a 208 209 210 30 1.182 25 0.985
6 8 x 1.25 206 207 n/a 208 209 210 30 1.182 25 0.985
7 10 x 1.5 417 n/a n/a 418 419 420 53 2.088 45 1.773
8 8 x 1.25 206 207 n/a 208 209 210 30 1.182 25 0.985
9 10 x 1.5 417 n/a n/a 418 419 420 53 2.088 45 1.773
10 8 x 1.25 206 207 n/a 208 209 210 30 1.182 25 0.985
11 8 x 1.25 206 207 n/a 208 209 210 30 1.182 25 0.985
12 10 x 1.5 417 n/a n/a 418 419 420 53 2.088 45 1.773
13 8 x 1.25 206 207 n/a 208 209 210 30 1.182 25 0.985
14 10 x 1.5 417 n/a n/a 418 419 420 53 2.088 45 1.773
15 8 x 1.25 206 207 n/a 208 209 210 30 1.182 25 0.985
16 8 x 1.25 206 207 n/a 208 209 210 30 1.182 25 0.985
17 10 x 1.5 417 n/a n/a 418 419 420 53 2.088 45 1.773
18 10 x 1.5 417 n/a n/a 418 419 420 53 2.088 45 1.773
19 8 x 1.25 206 207 n/a 208 209 210 30 1.182 25 0.985
20 8 x 1.25 206 207 n/a 208 209 210 30 1.182 25 0.985
21 10 x 1.5 417 n/a n/a 418 419 420 53 2.088 45 1.773
22 8 x 1.25 206 207 n/a 208 209 210 30 1.182 25 0.985
23 10 x 1.5 417 n/a n/a 418 419 420 53 2.088 45 1.773
24 8 x 1.25 206 207 n/a 208 209 210 30 1.182 25 0.985
25 10 x 1.5 417 n/a n/a 418 419 420 53 2.088 45 1.773
26 8 x 1.25 206 207 n/a 208 209 210 30 1.182 25 0.985
27 8 x 1.25 206 207 n/a 208 209 210 30 1.182 25 0.985
28 10 x 1.5 417 n/a n/a 418 419 420 53 2.088 45 1.773
29 8 x 1.25 206 207 n/a 208 209 210 30 1.182 25 0.985
30 8 x 1.25 206 207 n/a 208 209 210 30 1.182 25 0.985
31 10 x 1.5 417 n/a n/a 418 419 420 53 2.088 45 1.773
32 8 x 1.25 206 207 n/a 208 209 210 30 1.182 25 0.985
33 20 x 16 n/a n/a n/a n/a n/a n/a 33 1.300 23 0.906
34 8 x 1.25 n/a n/a n/a n/a n/a n/a 30 1.182 25 0.985
35 8 x 1.25 206 207 n/a 208 209 210 30 1.182 25 0.985
36 10 x 1.5 417 n/a n/a 418 419 420 53 2.088 45 1.773
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.