2004 Saab 9-5 Linear, StandardFACTORY OEM SERVICE PROCEDURE

Valve block, function: Notes

Fig 1: Identifying Valve Block
G03745794Courtesy of SAAB-SCANIA OF AMERICA, INC.

The valve block, which is an integral part of the hydraulic unit, modulates the brake pressure to the calipers when ABS and TCS braking is activated.

The valve block contains 12 solenoid valves: four inlet valves, four outlet valves, two pressure increase valves and two pressure reducing valves. These are arranged as follows: one inlet and one outlet valve for each of the four wheels and one pressure increase and one pressure reducing valve for each of the front wheels. The pressure increase and pressure reducing valves are activated only in TCS mode and are described in.

In the rest position, the inlet valve is open and the outlet valve closed. During ABS control the inlet valve is closed to maintain a constant pressure. The outlet valve opens at the same time as the return pump starts.

The valve block incorporates an accumulator chamber and a pressure chamber for each brake circuit. The accumulator chamber, which is located between the outlet valve and the return pump, accumulates the brake fluid until the return pump starts.

The function of the pressure chamber, which is located between the return pump and master cylinder, is to dampen both noise and pressure fluctuations when the return pump is operating (ABS mode).

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.