Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Saab 9-3 Linear, StandardFACTORY OEM SERVICE PROCEDURE
Engine number
ENGINE NUMBER SPECIFICATIONS
| Example | B 207LF M 00 3500001 | |
|---|---|---|
| Pos. 1 | Engine type B = petrol engine |
B |
| Pos. 2--3 | Swept volume 20=1.998 dm3 |
20 |
| Pos. 4 | Cylinder head 7 = 4 cylinders, in-line block of alloy with 2 balancer shafts and cylinder head with 2 camshafts and 4 valves per cylinder |
7 |
| Pos. 5 | Design L = turbocharged engine with charge air cooler, fuel injection: MFI, standard boost pressure, power 1 |
L |
| Pos. 6 | Car model F = Saab 9-3 M03- |
F |
| Pos. 7 | Transmission type A = automatic transmission M = manual transmission |
M |
| Pos. 8--9 | Variant 00 = basic level |
00 |
| Pos. 10 | Model year designation to ISO 3779 3=2003 |
3 |
| Pos. 11--16 | Serial number | 500001 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.