Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Saab 9-3 Linear, AutomaticFACTORY OEM SERVICE PROCEDURE
Compressor (170): Notes
COMPRESSOR (170) TECHNICAL DATA
| Type designation | Sanden PXV16 | |
| Compressor type | Reciprocating compressor with variable displacement | |
| Cylinder volume | cm3 | 163/5,5 |
| Oil quantity, new compressor | ml | 120 +/-15 cc |
| Speed range | r/min | 575-8000 |
| Weight with clutch | kg | 6,2 |
| Overheating protection in electromagnetic clutch (cannot be reset) | °C | 182+/-5 |
| Play, electromagnetic clutch | mm | 0,45+/-0,15 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.