2004 Saab 9-3 Linear, AutomaticFACTORY OEM SERVICE PROCEDURE

Main purpose

The primary function of the RLDM is to:

  • Read the status of the door lift buttons.
  • Control and supply the window lift in the passenger door (with optional pinch protection function).
  • Supply the central locking system motor in the door, with or without theft security locking (TSL), and to read the status of the central locking system and the TSL and transmit the value on the bus.
  • The control module also reads the door switch status via a direct connection but does not use the value. The connection is intended for future development. Supply the illumination of the buttons in the door.

The RLDM also has comfort function logic which under certain conditions allows activation of seats, mirrors and window lifts when the ignition is off.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.