2004 Saab 9-3 Linear, AutomaticFACTORY OEM SERVICE PROCEDURE

Diagnostics concept: General

Demands on car functionality have increased dramatically over the past few years. These developments have focused mainly on the car's electrical system; from the Saab 900 1994 which was introduced with an instrument bus and 4 control modules, the Saab 9-5 and 9-3 with both I-bus and P-bus and 13 control modules to the Saab 9- 3 Sport Sedan which contains as many as 30 control modules.

Aside from the I-bus and P-bus system, the Saab 9-3 Sport Sedan will introduce an optical bus, the O-bus, which links together the car's infotainment system. Additionally, an electronically-controlled steering column lock will be included. From the start, 8 of the car's control modules will be programmable with SPS (Service Program System). Most of the control modules have Flash memory and will be subsequently added to the SPS. A new function in the TIS 2000 allows for new SPS files to be accessed on the Internet between CD releases.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.