Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSSAAB20029-3 SE, 2D CONVERTIBLE, AUTOMATICREPAIR AND DIAGNOSISENGINE PERFORMANCESYSTEMTRIONIC T7 FUEL CONTROL SYSTEMADJUSTMENT-REPLACEMENTFUEL PUMPTO REMOVE

2002 Saab 9-3 SE, 2D Convertible, Automatic

To remove

2002 Saab 9-3 SE, 2D Convertible, AutomaticSECTION To remove

Fig 1: Illustration For Step 2

Courtesy of SAAB-SCANIA OF AMERICA, INC.

Remove the fuel tank. See FUEL TANK .
Remove the screw ring from the top of the fuel pump. Use special tool no. 83 94 462.
Lift the pump until it upper part is approx. 50 mm above the petrol tank. Then, turn it clockwise approx 80 degrees and carefully remove the pump.

Fig 2: Illustration For Step 3
Courtesy of SAAB-SCANIA OF AMERICA, INC.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.