Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSAAB19929000 BASE, 2.3 M, STANDARDREPAIR AND DIAGNOSISENGINE PERFORMANCEENGINE CONTROLS - SPECIFICATIONSFUEL SYSTEMDASHPOT SPECIFICATION
1992 Saab 9000 Base, 2.3 M, Standard
Dashpot Specification
1992 Saab 9000 Base, 2.3 M, StandardSECTION Dashpot Specification
Accelerate engine to 3000 RPM and measure time from release of throttle until engine reaches idle speed. If deceleration time is not 3-5 seconds, turn dashpot in toward stop to lengthen delay, or away from stop to shorten delay time.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.