Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSAAB1990900 SPG, AUTOMATICREPAIR AND DIAGNOSISENGINE PERFORMANCEENGINE CONTROLS - ADJUSTMENTSIGNITION TIMING
1990 Saab 900 SPG, Automatic
Ignition Timing
1990 Saab 900 SPG, AutomaticSECTION Ignition Timing
NOTE:
9000 Turbo models are equipped with Distributorless Ignition System (DIS). Timing is not adjustable.
- 1) Connect tachometer and timing light. Disconnect and plug vacuum advance hose (if equipped). Place transmission in Neutral. Ensure throttle position sensor is closed.
- 2) With engine at normal operating temperature, check ignition timing at specified RPM. See IGNITION TIMING TABLE . Adjust ignition timing, if necessary, by loosening distributor hold-down bolt and turning distributor.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.