Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1973 Saab 95 Not Available TransFACTORY OEM SERVICE PROCEDURE
BOSCH Distributors
NOTE:
FOR ENGINE RPM & DEGREES, MULTIPLY SPECIFICATION BELOW BY 2.
1973 BOSCH DISTRIBUTOR SPECIFICATIONS
| Distributor Part No. | Centrifugal Advance (Dist. Degrees & RPM) | Vacuum Advance (Dist. Degrees & In. of Hg.) | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Deg. | RPM | Deg. | RPM | Deg. | RPM | Deg. | RPM | Deg. | In. Hg. | Deg. | In. Hg. | Deg. | In. Hg. | |||||||||||
| 0 231 116 053 | 0-1 | 400-500 | 8-10 | 750 | 11-13 | 1000 | 13-15 | 1750 | 0 | 3.9 | 3 | 7.8 | 5 | 9.8 | ||||||||||
| 0 231 162 001 | 0-1 | 400-500 | 8-10 | 750 | 11-13 | 1000 | 13-15 | 1750 | 0 | 3.9 | 2-5 | 7.8 | 4.5-7.5 | 9.8 | ||||||||||
| 0 231 167 039 | 0-1 | 550-600 | 7-9 | 800 | 8.7-10.7 | 1500 | 10.2-12.5 | 2250 | 0 | 6.3 | 8.2 | 8.6 | 3.5-5 | 13.7 | ||||||||||
| 0 231 169 002 | 0-1 | 400-500 | 8-10 | 750 | 11-13 | 1000 | 13-15 | 1750 | 0 | 3.9 | 2-5 | 7.8 | 4.5-7.5 | 9.8 | ||||||||||
| 0 231 180 003 | 0-1 | 400-500 | 8-9 | 1000 | 14-17 | 1500 | 19-22 | 2100 | 0 | 4.7-5.9 | 2-4 | 7 | 4.6 | 8.6 | ||||||||||
| 0 231 180 005(1) | 0-1 | 300-400 | 5 | 500-600 | 11.5-14 | 1000 | 14-16 | 1200 | 0-1 | 5.2-5.4 | 8-12 | 5.7-6.5 | .......... | .......... | ||||||||||
| 039 905 205 | 0-1 | 900-1000 | 6-10 | 1500 | 20-24 | 3000 | ..... | ..... | (2) | (2) | (2) | (2) | (2) | (2) | ||||||||||
| JFU4(3) | 0-1 | 1000-1200 | 7.5-15 | 1400 | 28-32 | 3600 | ..... | ..... | (2) | (2) | (2) | (2) | (2) | (2) | ||||||||||
| JFUR4(4) | 0-1 | 500-600 | 5 | 675-760 | 10 | 1130-1750 | 11-12 | 1800 | (2) | (2) | (2) | (2) | (2) | (2) | ||||||||||
| JFURX4(4) | 0-1 | 375-550 | 5 | 800-970 | 7 | 970-1140 | 9 | 1200-1375 | (2) | (2) | (2) | (2) | (2) | (2) | ||||||||||
| JFUX4(4) | 0-1 | 420-530 | 5 | 830-980 | 7 | 1000-1150 | 10 | 1950-1980 | (2) | (2) | (2) | (2) | (2) | (2) | ||||||||||
| JFURX6(4) | 0-1 | 400-600 | 5 | 740-880 | 9 | 1180-1510 | 10-11 | 1600 | (2) | (2) | (2) | (2) | (2) | (2) | ||||||||||
| 73H-CA(5) | 0-2 | 500 | 3.5-5.5 | 750 | 5.5-7.5 | 1000 | 10-12 | 2000 | 0-2 | 5 | 1.7-3.7 | 10 | 1.7-3.7 | 15 | ||||||||||
| 73H-DA(5) | 0-.5 | 500 | 0-1 | 750 | 3-5 | 1000 | 10-12 | 2000 | 0 | 5 | 0-2 | 10 | 3.7-5.7 | 15 | ||||||||||
| 73TF-AA(5) | 0-.75 | 500 | 1-3 | 750 | 3.5-5.5 | 1000 | 8-10 | 2000 | 0-2 | 5 | 2-4 | 10 | 2-4 | 15 | ||||||||||
| 73TF-BA(5) | 0-.75 | 500 | 1.2-3.2 | 750 | 7.2-9.2 | 1000 | 8-10 | 2000 | 0-1.7 | 5 | 2-4 | 10 | 2-4 | 15 | ||||||||||
| 73TF-EA(5) | 0-.75 | 500 | 1.2-3.2 | 750 | 7.2-9.2 | 1000 | 8-10 | 2000 | 0-1.7 | 5 | 2-4 | 10 | 2-4 | 15 | ||||||||||
| VW No. 055905205 | 0-1 | 525-625 | 8-10 | 1100-1150 | 9.5-11.5 | 1500 | 13-15 | 2500 | ..... | ..... | 11 | 8.2-9.6 | 14 | 13.1-13.7 | ||||||||||
| 056905205C | 0-1 | 650-700 | 7.5-10 | 1050-1100 | 9.5-12.5 | 1500 | 13-15 | 2500 | ..... | ..... | 11 | 7.8-9.6 | 15 | 13.7 | ||||||||||
| 056905205B | 0-1 | 475-625 | 7.5-10 | 1100 | 11-13 | 2000 | 13-15 | 2500 | ..... | ..... | 11 | 8.2-9.5 | 16 | 13.3-13.7 | ||||||||||
| 60202103 | 1.75-3.5 | 500 | 2.2-7 | 750 | 8-12 | 1000 | 15.5-19 | 3000 | ..... | ..... | ..... | ..... | ..... | ..... | ||||||||||
| 043905205A | 0-1 | 500-600 | 6-7.5 | 800 | 6-8 | 1100 | 11-13.5 | 1900 | 0-1 | 2.1-3.6 | ..... | ..... | 8-12 | 7.2 | ||||||||||
| 021905205J | 0-1 | 500-600 | 4.5-7 | 800 | ..... | ..... | 10-12 | 1700 | 0-1 | 3.9-5.5 | ..... | ..... | 7-12 | 7.0 | ||||||||||
| 021905205F | 0-1 | 500-600 | 7-9.5 | 850 | 7.5-9.5 | 1200 | 10-12 | 1700 | 0-1 | 3.6-4.3 | ..... | ..... | 8-12 | 7.8-8.2 | ||||||||||
| 043905205 | 0-1 | 525-625 | 3-6 | 750 | ..... | ..... | 11-12.5 | 1900 | 0-1 | 2.3-3.9 | ..... | ..... | 8-12 | 7.8 | ||||||||||
| 043905205C | 0-1 | 500-625 | 3-6 | 750 | ..... | ..... | 11-12.5 | 1900 | 0-1 | 7-7.8 | ..... | ..... | 5-8 | 7.0-7.8 | ||||||||||
| 311905205AH | 0-1 | 500-600 | 6.5-9 | 800 | ..... | ..... | 9-12.5 | 2000 | 0-1 | 3.5-4.7 | ..... | ..... | 8-12 | 6.6-7.0 | ||||||||||
| 311905205AG | 0-1 | 500-600 | 5.5-8 | 900 | ..... | ..... | 9-12.5 | 1900 | 0-1 | 3.5-4.7 | ..... | ..... | 8-12 | 6.6-7.0 | ||||||||||
| 022905205P | 0-1 | 350-550 | 3.5-6 | 750 | ..... | ..... | 9.5-12 | 1500 | 0-1 | 3.9-5.1 | ..... | ..... | 5-9 | 5.5-6.2 | ||||||||||
|
||||||||||||||||||||||||
1973 BOSCH DISTRIBUTOR SPECIFICATIONS
| Distributor Part No. | Vacuum retard (Dist. Degrees & In. of Hg.) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Deg. | In. Hg. | Deg. | In. Hg. | Deg. | In. Hg. | |||||
| 039 905 205 | 0-1 | 3.1-5.2 | 8-12 | 5.8-6.2 | .... | .... | ||||
| JFUR4(1) | 0-1 | 5.9-9.4 | 2 | 9-12.2 | 3.5 | 11-12.6 | ||||
| JFURX4(1) | 0-1 | 1.2-4.3 | 3 | 3.2-5 | 5-6 | 5.1 | ||||
| JFUX4(1) | 0-1 | 1.1-4.2 | 3 | 3.1-4.9 | 5-6 | 5.1 | ||||
| JFURX6(1) | 0-1 | 1.2-4.3 | 2 | 2.4-4.7 | 5.0 | 5.1 | ||||
| 73H-CA(2) | 0 | 5 | 2.2 | 10 | 2-4 | 15 | ||||
| 73H-DA(2) | 0 | 5 | 0-3.7 | 10 | 2-4 | 15 | ||||
| 73TF-AA(2) | 0 | 5 | 0-3.7 | 10 | 5-7 | 15 | ||||
| 73TF-BA(2) | 0 | 5 | 0-3.5 | 10 | 2-4 | 15 | ||||
| VW No. 055905205 | ..... | ..... | 8 | 6.2-8.6 | 9 | 9.6-11.6 | ||||
| 056905205C | ..... | ..... | 8 | 5.9-8.6 | 9 | 9.8-11.8 | ||||
| 056905205B | ..... | ..... | 9 | 6.2-8.6 | 12 | 7.8-11.6 | ||||
| 60202103 | ..... | ..... | ..... | ..... | ..... | ..... | ||||
| 043905205A | ..... | ..... | ..... | ..... | ..... | ..... | ||||
| 021905205J | 0-1 | 2.7-4.7 | ..... | ..... | 16-18 | 6.6-8.2 | ||||
| 021905205F | 0-1 | 3.6-4.3 | ..... | ..... | 11-14 | 5.5-6.6 | ||||
| 043905205 | ..... | ..... | ..... | ..... | ..... | ..... | ||||
| 043905205C | 0-1 | 2.7-5.9 | ..... | ..... | 11-13 | 6.2-9.0 | ||||
| 311905205AH | ..... | ..... | ..... | ..... | ..... | ..... | ||||
| 311905205AG | ..... | ..... | ..... | ..... | ..... | ..... | ||||
| 022905205P | 0-1 | 2.3-3.9 | ..... | ..... | 7-12 | 5.5-6.2 | ||||
|
||||||||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.
