Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Porsche Cayenne Base, Automatic TransFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | Gas | w/Climatronic (2+2) | 8.40 OZS. | 0.24 L | PAG ND-OIL 8 | Approximate capacity. | S |
| Air Cond Compressor Oil | Gas | w/Climatronic (Right/Left) | 5.70 OZS. | 0.16 L | PAG ND-OIL 8 | Approximate capacity. | S |
| Air Cond Refrigerant | w/Climatronic (2+2) | 2.45 LBS. | 1.11 KG | R-134a | Approximate capacity. | S | |
| Air Cond Refrigerant | w/Climatronic (Right/Left) | 1.85 LBS. | 0.83 KG | R-134a | Approximate capacity. | S | |
| Engine Oil | Base | w/Filter | 7.29 QTS. | 6.89 L | MOBIL1 SAE 0W-40 (for all temperature ranges), SAE 5W-40 or SAE 5W-50 (for temperature ranges over -13Deg.f (-25Deg.C). | Use only fluids and fuels authorized by Porsche. | S |
| Fuel Tank | Base,S | 22.45 GALS. | 84.98 L | Includes: a reserve of 3.96 gal. | S | ||
| Windshield Washer Fluid | w/Headlight washer system | 4.76 QTS. | 4.5 L | Use a mixture of water and cleaner concentrate depending on the season | Follow the Manufacturer's Instructions for the mixture ratio. | S | |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.