Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Porsche 911 Targa 4, Standard TransFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 5.60 OZS. | 0.16 L | PAG 46 | S | |||
| Air Cond Refrigerant | 2.00 LBS. | 0.9 KG | R-134a | S | |||
| Brake Fluid | 0.48 QTS. | 0.45 L | Original PORSCHE Brake Fluid | Manufacturer's approved fluid only. | S | ||
| Clutch Fluid | Hydraulic Fluid | 0.48 QTS. | 0.45 L | Manufacturer's approved fluid only. | S | ||
| Differential Gear Oil | 3.17 QTS. | 2.99 L | Transmission Oil Mobilube PTX Formula A (SAE 75W-90) GL 4.5 | Manufacturer's approved fluid only. | S | ||
| Engine Coolant | 7.98 GALS. | 30.2 L | Manufacturer's approved fluid only. | S | |||
| Engine Oil | w/Filter | 7.92 QTS. | 7.49 L | MOBIL1 SAE 0W-40 (for all temperature ranges), SAE 5W-40 or SAE 5W-50 (for temperature ranges over -13Deg.f (-25Deg.C). | Complies with approval Porsche A40. | S | |
| Manual Transmission Fluid | Manual Transmission & Differential | 3.17 QTS. | 2.99 L | Transmission Oil Mobilube PTX Formula A (SAE 75W-90) GL 4.5 | Manufacturer's approved fluid only. | S | |
| Power Steering Fluid | 1.35 QTS. | 1.27 L | Hydraulic Fluid (Pentosin CHF 11 S) or (Pentosin CHF 202) | Manufacturer's approved fluid only. | S | ||
| Windshield Washer Fluid | w/Headlight washer | 1.57 GALS. | 5.94 L | Use a mixture of water and cleaner concentrate depending on the season | Follow the Manufacturer's Instructions for the mixture ratio. | S | |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
