Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Extracting and changing coding
Under the 'Coding' menu item you can read out which equipment features are activated and which are not.
The following equipment features can be read out:
- Tyre type
- Tyre size
- Instrument cluster 3"
- Instrument cluster 5"
- External spare wheel
- Spare wheel/sealing set
When the coding is changed in the "Coding" menu item, the serial numbers of the wheel electronics must always be read in afterwards. This can be done using the Porsche System Tester II No. 9588 or by driving for approx. 20 minutes. Otherwise the system is not active.Β
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
