Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Porsche Cayenne BaseFACTORY OEM SERVICE PROCEDURE
Wheel Alignment Work Sequence
- Ensure vehicle is prepared for alignment. See WHEEL ALIGNMENT PRELIMINARY CONDITIONS .
- Check and adjust the wheel alignment at the REAR axle first. Camber values at the front axle apply for the straight-ahead position of the wheels. Steering wheel and steering gear must be in straight-ahead position when toe is being adjusted.
- BEFORE wheel alignment values are adjusted at the front and rear axles, it is recommended that the vehicle height be checked at the empty weight. Conclusions can then be drawn about wheel alignment values in the event of any suspension alignment that becomes necessary later.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.