2002 Porsche Boxster Base, AutomaticFACTORY OEM SERVICE PROCEDURE

Coding New Pcm Control Module (GROUP 9, NO. 14/01)

Publication date: 2002-01-18
Reference number: GROUP 9, NO. 14/01

CODING NEW PCM CONTROL MODULE

CODING NEW PCM CONTROL MODULE

TECHNICAL SERVICE BULLETIN

Reference Number(s): GROUP 9, NO. 14/01, Date of Issue:  January 18, 2002
PORSCHE: 2001-on Boxster / Boxster S
GROUP: 8/9 - Air Conditioning, Electrics

DESCRIPTION

Coding New PCM Control Module

As of model year 2001 (1), the software ("K-number"), which calculates total mileage and fuel consumption in the PCM, has been changed. The software ("K-number") has also been changed in the instrument cluster to coincide with the PCM.

BULLETIN CONTENT

Fig 1: Page 1 of Bulletin
G00105950
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.