Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Porsche Boxster Base, AutomaticFACTORY OEM SERVICE PROCEDURE
Power transmission
POWER TRANSMISSION SPECIFICATIONS
| Clutch | Single-plate dry clutch with thrust plate, pressed version, two-mass flywheel |
| Thrust plate | GGG 60 (nodular cast iron) |
| Drive plate | Rigid 240 |
MANUAL TRANSMISSION SPECIFICATIONS
| Manual transmission | ||
|---|---|---|
| Transmission ratios | G 86/00 | |
| 1st gear | 3.50 | |
| 2nd gear | 2.12 | |
| 3rd gear | 1.43 | |
| 4th gear | 1.03 | |
| 5th gear | 0.79 | |
| R. gear | 3.44 | |
| Final drive | 3.89 | |
| Transmission weight with oil filling | kg | 49.2 |
TRIPTONIC SPECIFICATIONS
| Tiptronic | A 86/00 | |
|---|---|---|
| Torque converter 0 | mm | 254 |
| Moving-off ratio | 2.29: 1 | |
| Stall speed | rpm | 2700 - 400 |
| Transmission ratios: | ||
| 1st gear | 3.66 | |
| 2nd gear | 2.00 | |
| 3rd gear | 1.41 | |
| 4th gear | 1.00 | |
| 5th gear | 0.74 | |
| R. gear | 4.10 | |
| Final drive | 4.21 | |
| (Intermediate gearbox 1.25/axle 3.36) | ||
| Transmission weight with oil filling | kg | 112.5 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.