2000 Porsche Boxster Base, AutomaticFACTORY OEM SERVICE PROCEDURE

Removing And Installing Pistons: Tools

Fig 1: Identifying Tools
G03092180Courtesy of PORSCHE OF NORTH AMERICA, INC.
SPECIAL TOOLS

Item Designation Special tool Explanation
A Retaining device for pistons and connecting rods for pre-fitting the piston pins of cylinder bank 1 - 3 9597  
B Assembly sleeves for pre-fitting the piston pin circlips 9603  
C Assembly fixture for fitting piston pin circlips in assembly sleeve 9603 9500/3  
E Assembly tool for fitting the piston pins and piston pin circlips 9602  
E Centering mandrel for fitting pistons in cylinder bank 4-6 9608  
F Piston ring restraining strap    
G Assembly aid for positioning the pistons 9598  
H Fixing pin for fixing the belt pulley 9595 1 set = 2 ea. (use short fixing pin)
I Electric torch with mirror to check the piston pin circlips of cylinder bank 4-6   Shop-made or, for example, illuminated adjustable mirror.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.