Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Porsche Boxster Base, AutomaticFACTORY OEM SERVICE PROCEDURE
Technical data Boxster (2.7 L): Transmission
TRANSMISSION DESRIPTION
| Clutch | Single-plate dry clutch with thrust plate n pressed version, two-mass flywheel |
| Thrust plate | GGG60 |
| Drive plate | rigid 240 |
MANUAL TRANSMISSION GEAR RATIOS SPECIFICATIONS
| Manual transmission | ||
|---|---|---|
| Transmission ratiosG 86/01 | ||
| 1st gear | 3.50 | |
| 2nd gear | 2.12 | |
| 3rd gear | 1.43 | |
| 4th gear | 1.09 | |
| 5th gear | 0.84 | |
| Reverse gear | 3.44 | |
| Final drive | 3.56 | |
| Transmission weight filled with oil | kg | 48.3 |
TIPTRONIC SPECIFICATIONS
| Tiptronic | A 86/01 | |
|---|---|---|
| Torque converter diameter | mm | 254 |
| Stall speed | 1/min | 2400 - 400 |
| Transmission ratios: | ||
| 1st gear | 3.66 | |
| 2nd gear | 2.00 | |
| 3rd gear | 1.41 | |
| 4th gear | 1.00 | |
| 5th gear | 0.74 | |
| Reverse gear | 4.10 | |
| Final drive | 4.02 (intermediate gearbox 1.21/axle 3.33) |
|
| Transmission weight filled with oil | kg | 101.4 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.