Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Porsche Boxster (986) F6-2.7LFACTORY OEM SERVICE PROCEDURE
Modify Coding
The following settings can be selected from the menu and encoded under the menu item modify coding.
Coding Setting
- Parking aid active/ not active
- Upper lumbar present/ not present
- Lower lumbar present/ not present
- Parking aid on door mirror right/left
- Lowering 10 to 120 degrees
Procedure:
1. Select vehicle type.
2. Select Seat memory control module.
3. Select menu item modify coding.
4. Select desired coding as described above and press the double arrow key.
5. Select the desired setting with the arrow keys and press the F8 key.
Information:
The procedure for activating the parking aid is described in detail under Service and Repair.
Service and Repair
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.