Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1995 Porsche 968 2D Convertible, AutomaticFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 4.00 OZS. | 0.11 L | PAG 46 | S | |||
| Air Cond Refrigerant | 3.0L Eng | 1.89 LBS. | 0.85 KG | R-134a | S | ||
| Automatic Transmission Fluid | 3.0L Eng | 1.85 GALS. | 7 L | Automatic Transmission Fluid DEXRON IID | Manufacturer's approved fluid only. | S | |
| Brake Fluid | 3.0L Eng | 0.42 PTS. | 0.19 L | Original PORSCHE Brake Fluid | Manufacturer's approved fluid only. | S | |
| Differential Gear Oil | 3.0L Eng | 0.74 QTS. | 0.7 L | API - GL-5, SAE 75W-90 Hypoid Gear Oil (MiL-L-2105 B) | Manufacturer's approved fluid only. | S | |
| Engine Coolant | 3.0L Eng | 8.20 QTS. | 7.76 L | Phosphate-free antifreeze containing Ethylene Glycol Antifreeze recommended for aluminum engines | Manufacturer's approved fluid only. | S | |
| Engine Oil | 3.0L Eng | 6.87 QTS. | 6.5 L | API - SAE 5W-20 (Below -20Deg.F to 15Deg.F), 5W-30 (-20Deg.F to 30Deg.F),10W-30 (-10Deg.F to 70Deg.F), 10W-40 (-5Deg.F to 95Deg.F), 15W-40 (5Deg.F to Above 100Deg.F), 20W-40/50 (15Deg.F to Above 100Deg.F) | Manufacturer's approved fluid only. | S | |
| Fuel Tank | 3.0L Eng | 19.55 GALS. | 74 L | S | |||
| Manual Transmission Fluid | 3.0L Eng | 0.73 GALS. | 2.76 L | API - GL-5 Hypoid Gear Oil, SAE 75W- 90 (Mil-L-2105 B) | Manufacturer's approved fluid only. | S | |
| Power Steering Fluid | 3.0L Eng | 0.63 QTS. | 0.59 L | Automatic Transmission Fluid DEXRON IID | Manufacturer's approved fluid only. | S | |
| Windshield Washer Fluid | 3.0L Eng | 1.75 GALS. | 6.62 L | Use a winter cleaner or summer cleaner depending on the season | Follow the Manufacturer's Instructions for the mixture ratio. | S | |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.