1987 Porsche 928 AutomaticFACTORY OEM SERVICE PROCEDURE

Fuel Injectors

The electric fuel injectors are installed in the intake pipes. All 8 injectors are operated together. Since all injectors inject fuel simultaneously, some of the fuel is drawn in only when a pertinent intake valve opens.

The injection pulse signal is produced with each turn of the crankshaft, whereby only half of the metered fuel is injected. The fuel injectors are activated by ground (negative) pulses directly through the LH fuel control unit without series connected ballast resistors.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.