Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2010 Pontiac G5 Base, AutomaticFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Refrigerant | 0.90 LBS. | 0.4 KG | R-134a | S | |||
| Automatic Transmission Fluid | Complete Overhaul | 9.50 QTS. | 8.99 L | Automatic Transmission Fluid DEXRON VI | S | ||
| Automatic Transmission Fluid | Dry | 12.90 QTS. | 12.2 L | Automatic Transmission Fluid DEXRON VI | S | ||
| Automatic Transmission Fluid | Pan Removal | 7.00 QTS. | 6.62 L | Automatic Transmission Fluid DEXRON VI | S | ||
| Brake Fluid | N/A | N/A | DOT 3 Hydraulic Brake Fluid | S | |||
| Engine Coolant | 7.40 QTS. | 7 L | 50/50 mixture of DEX-COOL and clean drinkable water | S | |||
| Engine Oil | 5.00 QTS. | 4.73 L | API- SAE 5W-30 | GM Standard GM6094M and displays the American Petroleum Institute Certified for Gasoline Engines starburst symbol. For areas of extreme cold, where temperatures fall below -20Deg.F (-29Deg.C), it is recommended a SAE 5W-30 synthetic oil or a SAE 10W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures. | S | ||
| Fuel Tank | w/NU6 emissions | 13.50 GALS. | 51.1 L | S | |||
| Fuel Tank | w/o NU6 emissions | 13.00 GALS. | 49.21 L | S | |||
| Manual Transmission Fluid | Drain and Refill | 1.70 QTS. | 1.6 L | Automatic Transmission Fluid DEXRON VI | S | ||
| Manual Transmission Fluid | Dry | 1.90 QTS. | 1.79 L | Automatic Transmission Fluid DEXRON VI | S | ||
| Power Steering Fluid | N/A | N/A | S | ||||
| Windshield Washer Fluid | N/A | N/A | Optikleen Washer Solvent | S | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.