2009 Pontiac Torrent FWD V6-3.4LFACTORY OEM SERVICE PROCEDURE

Connecting Rod, Engine

CONNECTING ROD

Connecting Rod Side Clearance 0.25-0.37 mm (0.010-0.015 in)
Connecting Rod Bore Diameter 53.962-53.978 mm (2.124-2.125 in)
Connecting Rod Bore Out-of-Round 0.008 mm (0.0002 in)
Connecting Rod Journal Diameter 50.768-50.784 mm (1.9987-1.9994 in)
Connecting Rod Journal Out-of-Round 0.005 mm (0.0002 in)
Connecting Rod Journal Taper 0.005 mm (0.0002 in)
Connecting Rod Journal Width 21.92-22.08 mm (0.863-0.869 in)

Connecting Rod Bearing Cap Bolt
First Pass 20 Nm (15 lb ft)
Final Pass 75 degrees
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.