2009 Pontiac Solstice L4-2.0L TurboFACTORY OEM SERVICE PROCEDURE

Piston, Engine

Piston - Piston Diameter - @14.5 mm up 85.967-85.982 mm (3.3845-3.3851 in)
Piston - Piston Pin Bore Diameter 23.005-23.010 mm (0.9057-0.9059 in)
Piston - Piston Ring Groove Width - Oil Control 2.001-2.003 mm (0.0788-0.0789 in)
Piston - Piston Ring Groove Width - Second 1.52-1.54 mm (0.0598-0.0606 in)
Piston - Piston Ring Groove Width - Top 1.23-1.25 mm (0.0484-0.0492 in)
Piston - Piston To Bore Clearance 0.010-0.041 mm (0.0004-0.0016 in)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.