2008 Pontiac Solstice L4-2.4LFACTORY OEM SERVICE PROCEDURE

Fuel Level Sensor: Service and Repair



Fuel Level Sensor Replacement

Removal Procedure

Notice: Cap the fittings and plug the holes when servicing the fuel system in order to prevent dirt and other contaminants from entering the open pipes and passages.



Factory service manual diagram



1. Remove the fuel pump module. Refer to Fuel Pump Module Replacement (Service and Repair) .
2. Depress the retaining tab on the fuel level sensor and begin to slide the sensor away from the pump module.
3. Carefully slide the sensor the rest of the way off of the pump module.



Installation Procedure


Factory service manual diagram



1. Carefully slide the fuel level sensor into the slots on the fuel pump module bowl.
2. Secure the retaining tab on the sensor into the slot on the pump module bowl.
3. Install the fuel pump module. Refer to Fuel Pump Module Replacement (Service and Repair) .


Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.