2008 Pontiac Solstice L4-2.0L TurboFACTORY OEM SERVICE PROCEDURE

Coolant Temperature Sensor/Switch (For Computer): Service and Repair



Engine Coolant Temperature Sensor Replacement

Removal Procedure


Factory service manual diagram



1. Partially drain the cooling system. Refer to Cooling System Draining and Filling (GE-47716) (Service and Repair)Cooling System Draining and Filling (2.4L LE5 Only) Cooling System Draining and Filling (Static Fill-LNF) (Service and Repair) .
2. Remove the heat shield from the around the electrical connector, if necessary.
3. Disconnect the engine wiring harness electrical connector (3) from the engine coolant temperature (ECT) sensor.

Factory service manual diagram



4. Remove the ECT.



Installation Procedure


Factory service manual diagram




Notice: Refer to Fastener Notice (Fastener Notice) .

1. Install the ECT.

Tighten the sensor to 20 N.m (15 lb ft).


Factory service manual diagram



2. Connect the engine wiring harness electrical connector (3) to the ECT sensor.
3. Install the heat shield around the electrical connector, if necessary.
4. Fill the cooling system as needed. Refer to Cooling System Draining and Filling (GE-47716) (Service and Repair)Cooling System Draining and Filling (2.4L LE5 Only) Cooling System Draining and Filling (Static Fill-LNF) (Service and Repair) .


Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.