Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2008GRAND PRIX V6-3.8LREPAIR AND DIAGNOSISBODY AND FRAMELOCKSKEYLESS ENTRYKEYLESS ENTRY MODULESERVICE AND REPAIR
2008 Pontiac Grand Prix V6-3.8L
Keyless Entry Module: Service and Repair
2008 Pontiac Grand Prix V6-3.8LSECTION Service and Repair
Remote Control Door Lock Receiver Replacement
Removal Procedure
1. Remove the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement (Service and Repair) .
2. Reposition the sound barrier for access.
3. Disengage the receiver retainers.
4. Disconnect the electrical connector.
5. Remove the receiver.
Installation Procedure
1. Connect the electrical connector.
2. Align the receiver retainer to the openings in the rear shelf. Install the receiver.
3. Install the sound barrier.
4. Install the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement (Service and Repair) .
5. After replacement of the remote control door lock receiver, the transmitters will have to be programmed to the receiver. Refer to Transmitter Programming (Programming and Relearning) .
6. Refer to Control Module References (Programming and Relearning) for programming and setup information.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.