2007 Pontiac Torrent AWDFACTORY OEM SERVICE PROCEDURE

Scan Tool Data Definitions

WARNING: This page is about a different car, the 2006 Pontiac Torrent and 2006 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
Battery 1

The scan tool displays 0-25.5 volts. The state of the battery voltage supplied to the body control module (BCM).

Driver Door Switch

The scan tool displays the status of the driver door switch.

Ignition 1 Input

The scan tool displays the state of the ignition 1 Run/Crank input to the BCM.

Ignition 2 Input

The scan tool displays the state of the ignition 2 Acc/Run input to the BCM.

Ignition 3 Input

The scan tool displays the state of the ignition 3 Run input to the BCM.

Key In Ignition

The scan tool displays Yes/No. The BCM receives an input from the ignition switch indicating whether the key is in the ignition or not, with Yes meaning the key is in the ignition.

Liftgate Ajar Switch

The scan tool displays the status of the liftgate switch.

Pass Door Switches

The scan tool displays the status of the passenger doors switches.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.