2007 Pontiac Solstice Base, AutomaticFACTORY OEM SERVICE PROCEDURE

Engine Control Module (ECM) Connector End View C2

Fig 1: ECM C2 Connector End View
GM1590592Courtesy of GENERAL MOTORS CORP.
ECM C2 Connector Part Information

Connector Part Information 
  • OEM: 34566-2503
  • Service: 88988931
  • Description: 73-Way F 0.64 Receptacle 2.8 Series, Sealed (BK)
Terminal Part Information 
  • Pins: 1, 17, 20, 23, 27, 33, 35, 36, 39, 42, 43, 53, 56, 59, 62, 63, 67
  • Terminal/Tray: 33467-0003/23
  • Core/Insulation Crimp: H/H
  • Release Tool/Test Probe: J-38125-213/J-35616-64B (L-BU)
  • Pins: 2, 5, 8, 9, 11, 14, 29, 30, 32, 44, 46, 48, 50, 64, 66, 68, 69, 71, 72
  • Terminal/Tray: 33467-0005/23
  • Core/Insulation Crimp: Pins: 2, 5, 8, 9, 11, 14, 29, 30, 32, 44, 46, 48, 50, 64, 66, 68, 69, 71, 72 J/J
  • Core/Insulation Crimp: Pins: 11, 13 K/K
  • Release Tool/Test Probe: J-38125-213/J-35616-64B (L-BU)
  • Pins: 73
  • Terminal/Tray: 7116-4152-02/9
  • Core/Insulation Crimp: 2/5
  • Release Tool/Test Probe: 12094430/J-35616-35 (VT)
ECM C2 Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 PU 2121 IC 1 Control
2 TN/WH 3111 HO2S Low Reference Sensor 1
3 PU/WH 3110 HO2S Reference Voltage Sensor 1
4 PU/WH 1668 HO2S High Signal Sensor 2
5 TN/WH 1669 HO2S Low Signal Sensor 2
6-7 - - Not Used
8 D-BU 496 Knock Sensor Signal
9 GY 1716 Knock Sensor Signal
10 - - Not Used
11 YE 581 TAC Motor Control - 1
12 BN 582 TAC Motor Control - 2
13 PK/BK 5290 Ignition 1 Voltage
14 PU 5284 Camshaft Phaser Intake Solenoid (1)
15-16 - - Not Used
17 L-BU 2123 IC 3 Control
18-19 - - Not Used
20 GY 5296 Low Reference
21-22 - - Not Used
23 TN 5301 Low Reference
24-26 - - Not Used
27 PU 574 Low Reference
28 - - Not Used
29 TN 2752 Low Reference
30 L-GN 5282 Camshaft Phaser Exhaust Solenoid (1)
31 - - Not Used
32 L-GN/BK 1745 Fuel Injector 2 Control
33 D-GN/WH 2124 IC 4 Control
34 - - Not Used
35 BN 2129 Low Reference
36 YE/BK 5297 5-Volt Reference
37-38 - - Not Used
39 D-BU 5300 5-Volt Reference
40-41 - - Not Used
42 BK 2760 Low Reference
43 L-GN 2867 5-Volt Reference
44 GY 2701 5-Volt Reference
45 - - Not Used
46 TN 2199 Low Reference
47 - - Not Used
48 PK/BK 1746 Fuel Injector 3 Control
49 - - Not Used
50 TN 452 Low Reference
51-52 - - Not Used
53 OG/WH 2122 IC 2 Control
54-55 - - Not Used
56 D-GN 5273 Camshaft Position Exhaust Sensor (1)
57-58 - - Not Used
59 OG 5275 Camshaft Position Intake Sensor (1)
60-61 - - Not Used
62 TN 472 IAT Sensor Signal
63 YE 573 CKP Sensor 1 Signal
64 D-GN 485 TP Sensor Signal
65 - - Not Used
66 PU 486 TP Sensor 2 Signal
67 YE 492 MAF Sensor Signal
68 GY/WH 3113 HO2S Heater Low Control Sensor 1
69 GY/WH 3122 HO2S Heater Low Control Sensor 2
70 - - Not Used
71 L-BU/BK 844 Fuel Injector 4 Control
72 BK 1744 Fuel Injector 1 Control
73 BK/WH 451 Ground


Fig 1: Engine Control Module (ECM) C2 Connector End View
GM1360604Courtesy of GENERAL MOTORS CORP.
Engine Control Module (ECM) C2 Connector Part Information

Connector Part Information 
  • OEM: 1 928 401 713
  • Service:
  • Description: 58-Way
Terminal Part Information 
  • Pins:
  • Terminal/Tray:
  • Core/Insulation Crimp:
  • Release Tool/Test Probe:
Engine Control Module (ECM) C2 Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 BK/WH 451 Ground
2 BK/WH 451 Ground
3 PK/BK 5290 Ignition 1 Voltage
4 BK/WH 451 Ground
5 PK/BK 5290 Ignition 1 Voltage
6 PK/BK 5290 Ignition 1 Voltage
8 - - Not Used
9 TN 2759 Low Reference
10 D-GN/WH 465 Fuel Pump Relay Control
11 TN 5514 A/C Refrigerant Pressure Sensor Low Reference (C60)
12 YE 447 Starter Relay Coil Control
13 YE 492 MAF Sensor Signal
14 GY 2709 5-Volt Reference
15 D-BU 1161 APP Sensor 1 Signal
16 BN/WH 379 CPP Switch Signal (MA5)
17 OR/BK 1786 Transmission Park/Neutral Signal (M82)
18 L-GN 24 Backup Lamp Supply Voltage (M82)
19 WH 1310 EVAP Canister Vent Solenoid Control
20 BN 7448 Vacuum Assist Pump Relay Coil Control
21 - - Not Used
22 TN 2760 Low Reference
23 TN/WH 3121 Heated Oxygen Sensor Low Signal Bank 1 Sensor (2)
24 - - Not Used
25 L-BU 1162 APP Sensor 2 Signal
26 - - Not Used
27 D-GN 890 Fuel Tank Pressure Sensor Signal
28 - - Not Used
29 D-BU 1809 Brake Booster Vacuum Sensor Signal
30 - - Not Used
31 D-BU 6306 Clutch Start Neutral Start Signal (MA5)
32-33 - - Not Used
34 BN 1271 Low Reference
35 GY 2700 5-Volt Reference (C60)
36 PU 1589 Fuel Level Sensor Signal
37 - - Not Used
38 PU 3120 Heated Oxygen Sensor High Signal Bank 1 Sensor (2)
39 OR/BK 380 A/C Refrigerant Pressure Sensor Signal (C60)
40 PU 401 OSS Low Signal (MA5)
41 BN 4 Accessory Voltage
42 TN/BK 2500 High Speed GMLAN Serial Data Bus (+)
43 - - Not Used
44 D-GN/WH 459 A/c Compressor Clutch Relay Control (C60)
45 - - Not Used
46 WH 2368 Cooling Fan Clutch Supply Voltage
47 PU 1272 Low Reference
48 TN 1274 5-Volt Reference
49 WH/BK 1164 5-Volt Reference
50 L-BU 6289 Induction Air Temperature Sensor Signal
51 - - Not Used
52 L-BU 20 Stop Lamp Supply Voltage (M82)
53 YE 400 OSS High Signal (MA5)
54 PK 1039 Ignition 1 Voltage
55 TN 2501 High Speed GMLAN Serial Data BUS (-)
56 RD/WH 840 Battery Positive Voltage
57 - - Not Used
58 YE 5991 Powertrain Relay Coil Control
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.