Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Pontiac G6 L4-2.4LFACTORY OEM SERVICE PROCEDURE
Piston, Engine
Piston - Piston Diameter - @14.5 mm up 85.967-85.982 mm 3.3845-3.3851 in
Piston - Piston Pin Bore Diameter 20.002-20.007 mm 0.07875-0.7877 in
Piston - Piston Ring Grove Width - Oil Control 2.52-2.54 mm 0.0992-0.1000 in
Piston - Piston Ring Grove Width - Second 1.52-1.54 mm 0.0598-0.0606 in
Piston - Piston Ring Grove Width - Top 1.23-1.25 mm 0.0484-0.0492 in
Piston - Piston to Bore Clearance 0.010-0.041 mm 0.0004-0.0016 in
Piston - Piston Pin Bore Diameter 20.002-20.007 mm 0.07875-0.7877 in
Piston - Piston Ring Grove Width - Oil Control 2.52-2.54 mm 0.0992-0.1000 in
Piston - Piston Ring Grove Width - Second 1.52-1.54 mm 0.0598-0.0606 in
Piston - Piston Ring Grove Width - Top 1.23-1.25 mm 0.0484-0.0492 in
Piston - Piston to Bore Clearance 0.010-0.041 mm 0.0004-0.0016 in
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
