2007 Pontiac G6 L4-2.4LFACTORY OEM SERVICE PROCEDURE

Piston Ring, Engine

Piston Rings
Piston Ring End Gap - First Compression Ring 0.20-0.40 mm 0.008-0.016 in
Piston Ring End Gap - Second Compression Ring 0.35-0.55 mm 0.014-0.022 in
Piston Ring End Gap - Oil Control Ring - Rails 0.25-0.76 mm 0.010-0.030 in
Piston Ring to Groove Clearance - First Compression Ring 0.04-0.08 mm 0.0015-0.0031 in
Piston Ring to Groove Clearance - Second Compression Ring 0.030-0.069 mm 0.0012-0.0027 in
Piston Ring to Groove Clearance - Oil Control Ring 0.090-0.106 mm 0.0035-0.0042 in
Piston Ring Thickness - First Compression Ring 1.170-1.190 mm 0.0461-0.0469 in
Piston Ring Thickness - Second Compression Ring 1.471-1.490 mm 0.0579-0.0587 in
Piston Ring Thickness - Oil Control Ring - Rail - Maximum 0.43 mm 0.0169 in
Piston Ring Thickness - Oil Control Ring - Spacer 1.574-1.651 mm 0.0620-0.0650 in
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.