Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Pontiac G6 L4-2.4LFACTORY OEM SERVICE PROCEDURE
Piston Pin, Engine
Pin - Piston Pin Clearance to Connecting Rod Bore 0.007-0.026 mm 0.0003-0.0010 in
Pin - Piston Pin Clearance to Piston Pin Bore 0.002-0.012 mm 0.0001-0.0005 in
Pin - Piston Pin Diameter 19.995-20.000 mm 0.7872-0.7874 in
Pin - Piston Pin End Play 0.19-1.16 mm 0.0075-0.0461 in
Pin - Piston Pin Clearance to Piston Pin Bore 0.002-0.012 mm 0.0001-0.0005 in
Pin - Piston Pin Diameter 19.995-20.000 mm 0.7872-0.7874 in
Pin - Piston Pin End Play 0.19-1.16 mm 0.0075-0.0461 in
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
