2007 Pontiac G6 Base, 2.4 BFACTORY OEM SERVICE PROCEDURE

Rear Object Sensor Control Module C1

WARNING: This page is about a different car, the 2007 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Object Sensor Control Module C1 Connector End View
GM1664569Courtesy of GENERAL MOTORS CORP.
Rear Object Sensor Control Module C1 Connector Parts Information

Connector Part Information 
  • OEM: 31410-1120
  • Service: See Catalog
  • Description: 12-Way F CONN (BK)
Terminal Part Information 
  • Terminal/Tray: 7116-4618-02/14
  • Core/Insulation Crimp: P/P
  • Release Tool/Test Probe: J-38125-215/J-35616-64B (L-BU)
Rear Object Sensor Control Module C1 Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 RD/WH 2840 Battery Positive Voltage
2 WH 2370 Telltale Assembly Supply Voltage
3 - - Not Used
4 OG 2371 Left Amber Indicator Control
5 - - Not Used
6 D-GN 5060 Low Speed GMLAN Serial Data
7 BK 850 Ground
8 - - Not Used
9 D-BU 2372 Center Amber Indicator Control
10 GY 2373 Red Indicator Control
11 - - Not Used
12 D-GN 5060 Low Speed GMLAN Serial Data
Chapter Navigation
Return to Chapter: Object Detection Connector End Views
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.