Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2006 Pontiac Solstice L4-2.4L VIN BFACTORY OEM SERVICE PROCEDURE
Brakes and Traction Control: Specifications
Front Brakes
Brake Rotor Diameter 296.00 mm (11.653 inch)
Brake Rotor Discard Thickness* 23.0 mm (0.906 inch)
Brake Rotor Maximum Allowable Assembled Lateral Runout 0.06 mm (0.002 inch)
Brake Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
Brake Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
Brake Rotor Minimum Allowable Thickness After Refinish 23.5 mm (0.925 inch)
Brake Rotor Thickness - New 26.0 mm (1.023 inch)
Rear Brakes
Brake Rotor Diameter 2780.0 mm (10.945 inch)
Brake Rotor Discard Thickness* 10.0 mm (0.394 inch)
Brake Rotor Maximum Allowable Assembled Lateral Runout 0.06 mm (0.002 inch)
Brake Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
Brake Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
Brake Rotor Minimum Allowable Thickness After Refinish 10.5 mm (0.413 inch)
Brake Rotor Thickness - New 11.8 mm (0.465 inch)
* All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not
Brake Rotor Diameter 296.00 mm (11.653 inch)
Brake Rotor Discard Thickness* 23.0 mm (0.906 inch)
Brake Rotor Maximum Allowable Assembled Lateral Runout 0.06 mm (0.002 inch)
Brake Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
Brake Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
Brake Rotor Minimum Allowable Thickness After Refinish 23.5 mm (0.925 inch)
Brake Rotor Thickness - New 26.0 mm (1.023 inch)
Rear Brakes
Brake Rotor Diameter 2780.0 mm (10.945 inch)
Brake Rotor Discard Thickness* 10.0 mm (0.394 inch)
Brake Rotor Maximum Allowable Assembled Lateral Runout 0.06 mm (0.002 inch)
Brake Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
Brake Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
Brake Rotor Minimum Allowable Thickness After Refinish 10.5 mm (0.413 inch)
Brake Rotor Thickness - New 11.8 mm (0.465 inch)
* All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.