Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

2006 Pontiac Solstice AutomaticFACTORY OEM SERVICE PROCEDURE

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2007 Chevrolet Monte Carlo and 2007 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Application	Specification
Application	Metric	English
Inflatable Restraint Front End Sensor Fasteners	11 ± 1.5 N.m	97 ± 13 lb in
Inflatable Restraint Instrument Panel (I/P) Module Fasteners	10 N.m	89 lb in
Inflatable Restraint Roof Rail Module Fasteners	9 N.m	80 lb in
Inflatable Restraint Sensing and Diagnostic Module (SDM) Fasteners	10 N.m	89 lb in
Inflatable Restraint Side Impact Module Fasteners	5 N.m	45 lb in
Inflatable Restraint Side Impact Sensor (SIS) Fasteners	10 N.m	89 lb in
Seat Shoulder Belt Retractor Pretensioner Anchor Fastener	42 N.m	31 lb ft
Seat Shoulder Belt Retractor Pretensioner Fastener	42 N.m	31 lb ft
Seat Shoulder Belt Retractor Pretensioner Guide Fastener	42 N.m	31 lb ft

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready Tools Compare Repair Quote Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.