2006 Pontiac Solstice AutomaticFACTORY OEM SERVICE PROCEDURE

Body Control Module C3

Fig 1: Body Control Module C3 Connector View
GM1362564Courtesy of GENERAL MOTORS CORP.
Computer/Integrating Systems Connector End Views

Connector Part Information 
  • OEM: 15404825
  • Service: 15404825
  • Description: 41-Way F Metri-Pack 280 800 Series (RD)
Terminal Part Information 
  • Pins:
  • Terminal: TBD
  • Core/Insulation Crimp: TBD
  • Release Tool/Test Probe: TBD
Body Control Module C3

Pin Wire Color Circuit No. Function
A1 TN 294 Door Lock Actuator Unlock Control (A31)
A2 - - Not Used
A3 D-BU/WH 149 Courtesy Lamp Supply Voltage (UE1)
A3 D-BU/WH 149 Courtesy Lamp Supply Voltage
A4 GY 295 Door Lock Actuator Lock Control (A31)
A5 GY 295 Door Lock Actuator Lock Control (A31)
A6 - - Not Used
A7 BN 9 Park Lamp Supply Voltage
A8 - - Not Used
A9 YE 18 Left Rear Stop/Turn Lamp Supply Voltage
A10 GY 157 Interior Lamp Control (UE1)
A10 GY 157 Interior Lamp Control
A11 - - Not Used
A12 D-GN 19 Right Rear Stop/Turn Lamp Supply Voltage
B1 TN 694 Driver Door Lock Actuator Unlock Control (A31)
B2 - - Not Used
B3 RD/WH 1240 Battery Positive Voltage
B4 - - Not Used
B5 BN 4 Accessory Voltage
B6-B7 - - Not Available
B8-B12 - - Not Used
C1-C2 - - Not Available
C3-C4 - - Not Used
C5 D-GN 801 Retained Accessory Power Fuse Supply Voltage (A31)
C6-C7 - - Not Available
C8-C11 - - Not Used
C12 OG 228 Windshield Washer Pump Control
D1 RD/BK 142 Battery Positive Voltage
D2-D3 - - Not Used
D4 RD/WH 840 Battery Positive Voltage
D4 RD/WH 840 Battery Positive Voltage (M82)
D5 D-GN 801 Retained Accessory Power Fuse Supply Voltage (A31)
D6 PK 739 Run/Crank Ignition 1 Voltage
D7 PK 1339 Run/Crank Ignition 1 Voltage
D8-D9 - - Not Used
D10 RD/BK 442 Battery Positive Voltage
D11 RD/WH 640 Battery Positive Voltage (UQ3)
D12 RD/BK 242 Battery Positive Voltage
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.