Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2006 Pontiac GTO AutomaticFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 9.00 OZS. | 0.26 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.75 LBS. | 0.79 KG | R-134a | S | |||
| Automatic Transmission Fluid | Drain and Refill | 5.00 QTS. | 4.73 L | Automatic Transmission Fluid DEXRON VI | S | ||
| Automatic Transmission Fluid | Overhaul | 11.20 QTS. | 10.59 L | Automatic Transmission Fluid DEXRON VI | S | ||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Differential Gear Oil | Rear | 1.64 QTS. | 1.55 L | API - GL-5, SAE 75W-140 Synthetic Gear Oil | With a complete drain and refill add 1 oz. of Limited-Slip Differential Friction Modifier 7098. | S | |
| Engine Coolant | 11.60 QTS. | 10.97 L | 50/50 mixture of DEX-COOL and clean, drinkable water | After refill, the level must be checked. Add enough engine coolant so that the fluid is within the proper operating range. | S | ||
| Engine Oil | w/Filter | 6.55 QTS. | 6.19 L | API - SAE 5W-30 | Use synthetic oil that meets GM Standard GM4718M. | S | |
| Engine Oil | w/o Filter | 6.02 QTS. | 5.69 L | API - SAE 5W-30 | Use synthetic oil that meets GM Standard GM4718M. | S | |
| Fuel Tank | 18.50 GALS. | 70.03 L | S | ||||
| Manual Transmission Fluid | 4.65 QTS. | 4.4 L | Automatic Transmission Fluid DEXRON III | Look for "Approved for H-Specification" on the label. | S | ||
| Power Steering Fluid | 0.52 QTS. | 0.49 L | Automatic Transmission Fluid DEXRON III | Look for "Approved for H-Specification" on the label. | S | ||
| Windshield Washer Fluid | N/A | N/A | Optikleen Windshield Washer Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.