2005 Pontiac Vibe FWD L4-1.8L VIN 8FACTORY OEM SERVICE PROCEDURE

Positive Crankcase Ventilation: Testing and Inspection



CRANKCASE VENTILATION SYSTEM INSPECTION/DIAGNOSIS

1. Remove the positive crankcase ventilation (PCV) valve.

Factory service manual diagram



2. Blow air into the cylinder head side of the PCV valve.

NOTE: Refer to Fuel Vapors in Evaporative Emission (EVAP) Components Caution in Service Precautions.

3. Check that air passes through the PCV valve easily.

Factory service manual diagram



4. Blow air into the intake manifold side of the PCV valve.
5. Check that air passes through the PCV valve with high resistances.
6. If the PCV valve fails either test, replace the PCV valve. Refer to Positive Crankcase Ventilation Valve Replacement.
7. Inspect the PCV hose for damage, restrictions, or leaks. Replace the hose as necessary.
8. Inspect all PCV system passages and connections for leaks or restrictions. Repair as necessary.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.