2005 Pontiac Pursuit Base, AutomaticFACTORY OEM SERVICE PROCEDURE

Fastener Tightening Specifications

Fastener Tightening Specifications

Application Specification
Metric English
Accelerator Cable Bracket Bolts 10 N.m 89 lb in
Accelerator Pedal Retaining Nuts 10 N.m 89 lb in
Air Cleaner Assembly Attaching Nut 10 N.m 89 lb in
Air Cleaner Intake Duct Assembly Bolt 10 N.m 89 lb in
Air Cleaner Intake Duct Clamp 5 N.m 44 lb in
Air Cleaner Outlet Resonator Clamp 5 N.m 44 lb in
Bypass Valve Actuator Bolt 10 N.m 89 lb in
CKP Sensor Bolt 8 N.m 71 lb in
Engine Control Module (ECM) Harness Connector Bolt 4 N.m 35 lb in
Engine Coolant Temperature (ECT) Sensor 10 N.m 89 lb in
EVAP Canister Purge Valve Mounting Bracket Nut 8 N.m 71 lb in
EVAP Canister Retaining Bolt 10 N.m 89 lb in
Fuel Filler Hose Clamp 4.5 N.m 40 lb in
Fuel Filler Pipe Attaching Screw 10 N.m 89 lb in
Fuel Filler Pipe Lower Retaining Bolt 10 N.m 89 lb in
Fuel Filter Retaining Bolt 10 N.m 89 lb in
Fuel Rail Studs 10 N.m 89 lb in
Fuel Supply Line Fitting 10 N.m 89 lb in
Fuel Tank Strap Bolts 25 N.m 18 lb ft
Heated Oxygen Sensor (HO2S) 1 30 N.m 22 lb ft
Heated Oxygen Sensor (HO2S) 2 41 N.m 30 lb ft
Idle Air Control (IAC) Valve Screw 3 N.m 27 lb in
Ignition Coil Housing Retaining Bolts 10 N.m 89 lb in
Ignition Control Module (ICM) Screws 1.5 N.m 13 lb in
Knock Sensor (KS) 25 N.m 18 lb ft
Mass Air Flow Sensor Bolt 10 N.m 89 lb in
Rear Brake Hose Bracket 10 N.m 89 lb in
Spark Plugs 20 N.m 15 lb in
Throttle Body Attaching Bolts 10 N.m 89 lb in
Throttle Position (TP) Sensor Mounting Screw 2 N.m 18 lb in
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.