Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2005 Pontiac Aztek Base, FWDFACTORY OEM SERVICE PROCEDURE
Trim Height Specifications
Trim Height Specifications
| Model/Restrictions | Dimension D |
Dimension J |
Dimension K |
Dimension Z |
|---|---|---|---|---|
| Front Wheel Drive | ||||
|
143-163 mm (5.6-6.4 in) |
237-257 mm (9.3-10.1 in)1 |
260-280 mm (10.2-11.0 in)1 |
55-75 mm (2.1-2.9 in) |
|
143-163 mm (5.6-6.4 in) |
240-260 mm (9.4-10.2 in)1 |
263-283 mm (10.3-11.1 in)1 |
55-75 mm (2.1-2.9 in) |
|
143-163 mm (5.6-6.4 in) |
251-271 mm (9.8-10.6 in)1 |
274-294 mm (10.7-11.5 in)1 |
55-75 mm (2.1-2.9 in) |
|
153-158 mm (6.0-6.22 in) |
257-259 mm (10.1-10.2 in) |
279-283 mm (10.9-11.1 in) |
65-67 mm (2.5-2.6 in) |
| All Wheel Drive | ||||
|
87-107 mm (3.4-4.2 in) |
240-260 mm (9.4-10.2 in)1 |
251-271 mm (9.8-10.6 in)1 |
55-75 mm (2.1-2.9 in) |
|
87-107 mm (3.4-4.2 in) |
251-271 mm (9.8-10.6 in)1 |
272-292 mm (10.7-11.4 in)1 |
55-75 mm (2.1-2.9 in) |
|
153-158 mm (6.0-6.22 in) |
257-259 mm (10.1-10.2 in) |
279-283 mm (10.9-11.1 in) |
65-67 mm (2.5-2.6 in) |
| 1 Measure the J dimension and the K dimension 650 mm (25.5 in) from the centerline of the nearest wheel. These points are identified on the vertical surface of the rocker panel by a 2 mm (.08 in) diameter and 1 mm (.04 in) high circle. | ||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.