Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Pontiac GTO StandardFACTORY OEM SERVICE PROCEDURE
Accelerator Controls Pedal Replacement: Notes
- Remove the two fuel rail covers.
- Remove the throttle relaxer cover (1).
- Remove the cruise control cable (2).
- Remove the accelerator pedal cable (3).
- Remove the retainer clip at the theft deterrent horn bracket.
- Remove the left instrument panel lower trim. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel Gages, and Console.
- Disconnect the accelerator pedal cable (2) from the accelerator pedal lever (1), inside the vehicle
- After releasing the accelerator pedal cable from the slot in the accelerator pedal lever (1), pull the cable through the dash panel from the engine side.
- Remove the accelerator cable from the vehicle.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.