2004 Pontiac GTO AutomaticFACTORY OEM SERVICE PROCEDURE

Electrical Component Locator: Connectors

CONNECTORS LOCATION

Component Location
C101 Next to A/C pressure sensor.
C106 Behind the battery.
C110 Behind left front fog lamp.
C200 Right kick panel.
C201 Right kick panel.
C204 Attached to blower motor.
C205 Right rear of passenger air bag.
C206 Left kick panel.
C209 Near clutch pedal switch.
C300 Right "B" pillar.
C301 Under the shifter bezel.
C302 Passenger seat rail.
C303 Below center console.
C309 Under the center console.
C310 Passenger roof rail behind "A" pillar.
C315 Driver seat rail.
C316 Near stop lamp switch.
C402 In trunk, right of fuel tank.
C500 Left kick panel.
C501 Left kick panel.
C600 Right kick panel.
C903 Behind right tail lamp.
C904 Behind left tail lamp.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.