Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Pontiac GTO AutomaticFACTORY OEM SERVICE PROCEDURE
Installation Procedure
- Install a stationary window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows .
- Install the rearview mirror. Refer to Rearview Mirror Replacement .
- Install the windshield garnish molding. Refer to Garnish Molding Replacement - Windshield Pillar in Interior Trim.
- Install the defroster grille panels. Refer to Defroster Grille Replacement in Instrument Panel, Gages, and Console.
- Install the instrument panel outer trim panels. Refer to Instrument Panel (I/P) Outer Trim Cover Replacement in Instrument Panel, Gages, and Console.
- Install the air inlet grille. Refer to Air Inlet Grille Panel Replacement in Body Front End.
- Install the windshield wipers arms and blades. Refer to Wiper Arm Replacement in Wipers/Washer Systems.
- Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
- Close the hood.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.