2004 Pontiac GTO AutomaticFACTORY OEM SERVICE PROCEDURE

Powertrain Interface Module (PIM) Connector End View

Powertrain Interface Module (PIM) Connector End View

GM1356055Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 7283-7367-30
  • 16-Way Female (BK)
Pin Wire Color Circuit No. Function
1-5 - - Not Used
6 RD/BK 800 UART Serial Data (Primary)
7 YE 1045 RFA Class 2 Serial Data
8 GY/BU 275 Park Neutral Position Switch Park Signal
9-14 - - Not Used
15 OG 300 Ignition 3 Voltage
16 BK/RD 450 Ground


Powertrain Interface Module (PIM) Connector End View

GM1356055Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 7283-736-30
  • 16 Way Female (BK)
Pin Wire Color Circuit No. Function
1-5 - - Not Used
6 RD/BK 800 UART Serial Data-Primary
7 YE 1045 RFA Class 2 Serial Data
8 GY/BU 275 Park Neutral Position Switch Park Signal
9-14 - - Not Used
15 OG 300 Ignition 3 Voltage
16 BK/RD 450 Ground
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.