Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Installation Procedure
- Install the memory seat module to the seat frame.
- Press the module into the bracket until the module is firmly seated.
- Connect the electrical connector to the memory seat module.
- Install the seat cushion assembly (1) to the seat riser.
- Install the fasteners (2) to the seat cushion assembly (1).
- Adjust the front seat assembly up and forward in order to access the fasteners (1).
- Install the fasteners (1) to the seat cushion assembly.
Tighten: Tighten the fasteners to 9 N.m (80 lb in).
- Angle the front seat cushion up, in order to access the assembly fasteners.
Tighten: Tighten the fasteners to 9 N.m (80 lb in).
- Enable the SIR. Refer to SIR Disabling and Enabling Zone 7 in SIR.
- Calibrate the seat. Refer to Memory Seat Calibration Procedure .
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.