Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2003 Pontiac Vibe Base, AWDFACTORY OEM SERVICE PROCEDURE
Generator Specifications
GENERATOR SPECIFICATIONS
| Application | Specification | ||
|---|---|---|---|
| Generator Model | Denso | ||
| Rated Output | 80 Amps | ||
| Load Test Output | 56 Amps | ||
| Brush Length | |||
| Limit (Minimum) | .059" (1.50 mm) | ||
| Standard | .413" (10.50 mm) | ||
| Generated Regulator Output | 13.5-15.1 Volts | ||
| Maximum Generator Output | 80 Amps | ||
| Rotor | |||
| Resistance | |||
| Between Rotor & Slip Rings | 5 Ohms Or More | ||
| Between Slip Rings | 2.7-3.1 Ohms | ||
| Slip Ring Diameter | |||
| Limit (Minimum) | .504" (12.80 mm) | ||
| Standard | .559-.567" (14.20-14.40 mm) | ||
| Stator Resistance | |||
| Between Stator Core & Stator Leads | 5 Ohms Or More | ||
| Between Stator Leads | Less Than 5 Ohms | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.