FLUID CAPACITY (CRANKCASE) ⁽¹⁾

Application

⁽²⁾ Quantity - Qts. (L)

All Models

5.0 (4.8)

⁽¹⁾	Fluid capacities listed are approximate. Always fill to FULL mark.

⁽²⁾	Includes oil filter capacity.

FLUID CAPACITY (COOLING SYSTEM) ⁽¹⁾

Application

⁽²⁾ Quantity - Qts. (L)

All Models

8.6 (8.2)

⁽¹⁾	Fluid capacities listed are approximate. Always fill to FULL mark.

⁽²⁾	Includes heater. Use 50/50 mixture of clean, drinkable water and use only GM Goodwrench(R) DEX-COOL(R) or Havoline(R) DEX-COOL(R) coolant.

FLUID CAPACITY (AUTOMATIC TRANSAXLE) ⁽¹⁾

Application

⁽²⁾ Quantity - Qts. (L)

4T40-E (MN4)

Bottom Pan Removal

6.9 (6.4)

Complete Overhaul

9.5 (9.0)

Dry

12.9 (12.2)

⁽¹⁾	Fluid capacities listed are approximate. Always fill to FULL mark.

⁽²⁾	Unless otherwise specified, use Dexron(R)-III transmission fluid.

FLUID CAPACITY (MANUAL TRANSAXLE) ⁽¹⁾

Application

Quantity - Qts. (L)

M86

⁽²⁾ 1.8 (1.7)

⁽¹⁾	Fluid capacities listed are approximate. Always fill to FULL mark.

⁽²⁾	Use Dexron(R) III transmission fluid.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Engine Controls - Service & Adjustment Specifications: Capacities