2003 Pontiac Grand Prix GTFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 9.00 OZS. 0.26 L PAG 150 S
Air Cond Refrigerant 2.40 LBS. 1.08 KG R-134a S
Automatic Transmission Fluid Complete Overhaul 10.00 QTS. 9.46 L Automatic Transmission Fluid DEXRON VI Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. S
Automatic Transmission Fluid Pan Removal and Replacement 7.40 QTS. 7 L Automatic Transmission Fluid DEXRON VI Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Engine Coolant 3.8L Eng w/Reservoir tank 11.20 QTS. 10.59 L 50/50 mixture of DEX-COOL and clean, drinkable water After refill, the level must be checked. Add enough engine coolant so that the fluid is within the proper operating range. S
Engine Oil w/Filter 4.50 QTS. 4.25 L API - SAE 5W-30 If the temperature range is 0Deg.F (-18Deg.C) or above SAE 10W-30 oil which has the API Starburst symbol is acceptable if SAE 5W 30 oils is not available. Areas where the temperature falls below -20Β°F (-29Β°C), it is recommended either an SAE 5W-30 synthetic oil or and SAE 0W-30 oil. Both will provide easier cold starting and better protection for the engine at extremely low temperatures. Do not use other viscosity grade oils, such as SAE 10W-40 or SAE 20W-50 under any conditions. S
Engine Oil w/o Filter 4.00 QTS. 3.78 L API - SAE 5W-30 If the temperature range is 0Deg.F (-18Deg.C) or above SAE 10W-30 oil which has the API Starburst symbol is acceptable if SAE 5W 30 oils is not available. Areas where the temperature falls below -20Β°F (-29Β°C), it is recommended either an SAE 5W-30 synthetic oil or and SAE 0W-30 oil. Both will provide easier cold starting and better protection for the engine at extremely low temperatures. Do not use other viscosity grade oils, such as SAE 10W-40 or SAE 20W-50 under any conditions. S
Fuel Tank 17.20 GALS. 65.1 L S
Power Steering Fluid N/A N/A GM Power Steering Fluid S
Windshield Washer Fluid N/A N/A Optikleen Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.